BAM - MECHANICAL DIMENSIONS - Emtas Elektrik A.Ş.

TYPE	H	A	B	C	AB	AD	BB	HD	K	L	LA	LC	D	E	F	GA	P	N	M	S	T	R	d1	d2	e	f	ga
112M	112	190	140	70	235	176	175	262	12	528	14	594	28	60	8	31	250	180	215	15	4	Pg13.5	-	-	-	-	-
132m	132	216	178	89	270	207	218	309	12	658	18	738	38	80	10	41	360	230	265	15	4	Pg21	-	-	-	-	-
132S	132	216	140	89	270	207	180	309	12	620	18	700	38	80	10	41	300	230	265	15	4	Pg21	-	-	-	-	-
160L	160	254	254	108	318	236	307	373	15	792	18	902	42	110	12	45	350	250	300	19	5	Pg21	-	-	-	-	-
160M	160	254	210	108	318	236	260	373	15	751	18	861	42	110	12	45	350	250	300	19	5	Pg21	-	-	-	-	-
180L	180	279	279	121	360	250	329	411	15	785	18	895	48	110	14	52	350	250	300	19	5	Pg21	M30x2	39.8	82	12	48.9
200L	200	318	305	133	400	319	365	460	19	904	18	1014	55	110	16	59	400	300	350	19	5	Pg29	M36x2	46.8	82	15	56.4
225M	225	356	311	149	436	300	371	504	19	935	18	1075	60	140	18	64	450	350	400	19	5	Pg36	M42x3	49.5	105	16	61.4
225S	225	356	286	149	436	300	346	504	19	910	18	1050	60	140	18	64	450	350	400	19	5	Pg36	M42x3	49.5	105	16	61.4
250M	250	406	349	168	485	345	410	552	24	1120	18	1260	65	140	18	69	550	450	500	19	5	Pg36	M42x3	54.5	105	16	66.4
280Ma	280	457	419	190	536	381	490	613	24	1219	18	1359	75	140	20	80	550	450	500	19	5	Pg48	M48x3	62	105	18	76.4
280Mc	280	457	419	190	536	381	490	613	24	1316	18	1456	75	140	20	80	550	450	500	19	5	Pg48	M48x3	62	105	18	76.4
280S	280	457	368	190	536	381	439	613	24	1219	18	1359	75	140	20	80	550	450	500	19	5	Pg48	M48x3	62	105	18	76.4
315L	315	508	508	258	620	430	600	682	28	1466	24	1640	85	170	22	90	660	550	600	24	6	Pg48	-	-	-	-	-
315Lb	315	508	508	258	620	430	600	682	28	1366	24	1540	85	170	22	90	660	550	600	24	6	Pg48	-	-	-	-	-
315Ma	315	508	457	258	620	430	550	682	28	1315	24	1489	85	170	22	90	660	550	600	24	6	Pg48	-	-	-	-	-

H	Distance from the centre-line of the shaft to the bottom of the feet (basic dimension)
A	Distance between centre-lines of fixing holes (end view).
B	Distance between the centre-lines of the fixing holes (side view).
C	Distance from the shoulder on the shaft at D-end to the centre-line of the mounting holes in the nearest feet.
AB	Over-all dimension across the feet (end view).
AC	Diameter of the machine
AD	Distance from the centre-line of the machine to extreme outside of the terminal box or other most salient part mounted on the side of the machine.
BB	Over-all dimension across the feet (side view).
HC	Distance from the top of the horizontal machine to the bottom of the feet.
HD	Distance from the top of the lifting eye, the terminal box or other most salient part mounted on the top of the machine to the bottom of the feet.
K	Diameter of the holes or width of the slots in the feet of the machine.
L	Overall length of the machine with a single shaft extension.
LC	Overall length of the machine when there is a shaft extension at N-end.
D	Diameter of the shaft extension at D-end.
E	Length of the shaft extension from the shoulder at D-end.
F	Width of the keyway of the shaft extension at D-end.
GA	Distance from the top of the key to the opposite surface of the shaft extension at D-end.
GD	Thickness of the key of the shaft extension at D-end.
R	Distance from the mounting surface of the flange to the shoulder on the shaft.
DB	Lifting ring screw thread size, used to lift the engine on some of our engines.

BAM – MECHANICAL DIMENSIONS